Product Specification
MATERIAL
| Ground post |
90 x 90 x 5 mm RHS |
| Outer mast |
90 x 90 x 3.6mm RHS |
| Inner Mast |
76.1mm OD CHS |
| Ground Socket |
1mm sheet folded |
| Rotator Housing |
Fabricated plate and tube welded construction |
CONSTRUCTION AND FINISH
Welded using MIG process.
Galvanised to ISO 1461.
SPECIFICATIONS
| Ground post length |
2.5m |
1.6m above ground |
| Outer mast length |
6.55m |
|
| Inner mast length |
6.4m |
|
| Mast tilted over |
1.6m |
|
| Mast vertical lowered |
6.9m |
|
| Mast vertical raised |
12m |
|
HEAD LOAD CAPACITY
| Nominal |
20kg |
| Maximum |
30kg |
e.g.: A full sized H.F. tribander and 2m co-linear.
Guying recommended when raised in windy conditions.
WINCH
DL1100
For safety, the DL 800 Friction braked winch can be supplied as an option,
at additional cost.
MOUNTING
In one cubic metre of concrete supplied by the user.
The ground socket is installed in the concrete, allowing easy post removal.
STUB MAST
Any Alloy pole up to 48.1mm OD can be accommodated, and should be restricted
to a maximum length of 2.0m i.e. 1.5m above the rotator cage.
When delivered, the mast is complete and ready to install. It is delivered
in three packages.
Shipping weight is 150kg. |
